2024-04 |
Three-axis load analysis of high-speed handpiece on dental training teeth and computer-aided design/computer-aided manufacturing blocks |
Journal of the Mechanical Behavior of Biomedical Materials
|
2023-08 |
A prospective multicenter clinical study on the efficiency of detachable ball-and spring-retained implant prosthesis |
Journal of Advanced Prosthodontics
|
2023-01 |
Effects of heat-treatment methods on cytocompatibility and mechanical properties of dental products 3D-printed using photopolymerized resin |
Journal of Prosthodontic Research
|
2022-11 |
Influence of postwashing process on the elution of residual monomers, degree of conversion, and mechanical properties of a 3D printed crown and bridge materials |
Dental Materials
|
2022-10 |
Accuracy of 3D printed models and implant-analog positions according to the implant-analog-holder offset, inner structure, and printing layer thickness: an in-vitro study |
JOURNAL OF DENTISTRY
|
2022-06 |
Accuracy of Bite Registration Using Intraoral Scanner Based on Data Trimming Strategy for Fremitus Teeth |
대한치의학회 영문학회지
|
2022-06 |
Sleeve insert scan body to predict implant placement position by using implant surgical guides: A dental technique |
JOURNAL OF PROSTHETIC DENTISTRY
|
2022-04 |
Influence of different postcuring parameters on mechanical properties and biocompatibility of 3D printed crown and bridge resin for temporary restorations |
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS
|
2022-03 |
Accuracy of Surgical Robot System Compared to Surgical Guide for Dental Implant Placement |
대한구강악안면임프란트학회지 (Implantology)
|
2022-02 |
Dental students’ perceptions on a simulated practice using patient- based customised typodonts during the transition from preclinical to clinical education |
EUROPEAN JOURNAL OF DENTAL EDUCATION
|
2022-01 |
Application of additive and subtractive manufacturing technology for a digitally fabricated removable partial denture after a partial maxillectomy: A clinical report |
JOURNAL OF PROSTHETIC DENTISTRY
|
2021-11 |
Evaluating the three-dimensional printing accuracy of partial-arch models according to outer wall thickness: an in vitro study |
MATERIALS
|
2021-10 |
Evaluation of Dimensional Changes during Postcuring of a Three-Dimensionally Printed Denture Base According to the Curing Time and the Time of Removal of the Support Structure: An In Vitro Study |
APPLIED SCIENCES-BASEL
|
2021-10 |
Evaluation of Dimensional Changes According to Aging Period and Postcuring Time of 3D-Printed Denture Base Prostheses: An In Vitro Study |
MATERIALS
|
2021-10 |
Effects of Artificial Tooth Brushing and Hydrothermal Aging on the Mechanical Properties and Color Stability of Dental 3D Printed and CAD/CAM Materials |
MATERIALS
|
2021-07 |
Alteration of the Occlusal Vertical Dimension for Prosthetic Restoration Using a Target Tracking System |
APPLIED SCIENCES-BASEL
|
2021-05 |
Effect of Acid Mixtures on Surface Properties and Biaxial Flexural Strength of As-sintered and Air-Abraded Zirconia |
MATERIALS
|
2021-04 |
A Comparison of Accuracy of Different Dental Restorative Materials between Intraoral Scanning and Conventional Impression-Taking: An In Vitro Study |
MATERIALS
|
2021-04 |
Restorative Space Analysis by Jaw Motion Tracking Using a Template in Completely Edentulous Patients |
APPLIED SCIENCES-BASEL
|
2021-04 |
Effects of groove sealing of the posterior occlusal surface and the offset of the internal surface on the internal fit and accuracy of implant placement using 3D printed surgical guides: an in vitro study |
POLYMERS
|
2021-03 |
Evaluation of the Trueness of Digital Implant Impressions According to the Implant Scan Body Orientation and Scanning Method |
APPLIED SCIENCES-BASEL
|
2021-02 |
In vitro comparison between metal sleeve-free and metal sleeve-incorporated 3d-printed computer-assisted implant surgical guides |
MATERIALS
|
2021-02 |
Accuracy of Implant Position Reproduction According to Exposed Length of the Scan Body during Optical Scanning: An In Vitro Study |
APPLIED SCIENCES-BASEL
|
2021-02 |
Influence of Edentulous Conditions on Intraoral Scanning Accuracy of Virtual Interocclusal Record in Quadrant Scan |
APPLIED SCIENCES-BASEL
|
2021-01 |
Accuracy Improvement of Intraoral Scanning and Buccal Bite Registration Using Healing Abutment as Landmarks: An In Vitro Study |
APPLIED SCIENCES-BASEL
|
2021-01 |
In Vivo Study for Clinical Application of Dental Stem Cell Therapy Incorporated with Dental Titanium Implants |
MATERIALS
|
2021-01 |
Mounting casts on a mechanical articulator by using digital multisource data: A dental technique |
JOURNAL OF PROSTHETIC DENTISTRY
|
2020-12 |
Comparison between Occlusal Errors of Single Posterior Crowns Adjusted Using Patient Specific Motion or Conventional Methods |
APPLIED SCIENCES-BASEL
|
2020-12 |
Study on the Development of Training Programs for Standardized Patients of the Practical Examination Portion of the National Dental Licensing Examination |
대한치의학회 영문학회지
|
2020-11 |
Evaluation of the 3D Printing Accuracy of a Dental Model According to Its Internal Structure and Cross-Arch Plate Design: An In Vitro Study |
MATERIALS
|
2020-11 |
Effects of Post-Curing Time on the Mechanical and Color Properties of Three-Dimensional Printed Crown and Bridge Materials |
POLYMERS
|
2020-11 |
Evaluation of the Color Stability of 3D-Printed Crown and Bridge Materials against Various Sources of Discoloration: An In Vitro Study |
MATERIALS
|
2020-09 |
Abutment-Level Digital Impression Using Abutment Matching Algorithm, And Insurance-Covered Implant Prosthesis By Metal 3D Printing: A Case Report |
대한구강악안면임프란트학회지 (Implantology)
|
2020-07 |
의치진료 경험 후 치과대학 학생들의 임상진료능력에 대한 자기인식도 |
대한치과보철학회지
|
2020-06 |
Effect of Pressure and Particle Size During Aluminum Oxide Air Abrasion on the Flexural Strength of Disperse-Filled Composite and Polymer-Infiltrated Ceramic Network Materials |
POLYMERS
|
2020-04 |
Transfer Learning via Deep Neural Networks for Implant Fixture System Classification Using Periapical Radiographs |
Journal of Clinical Medicine
|
2020-03 |
Digital approach for production of interim implant-supported fixed restoration with a prefabricated implant component library |
JOURNAL OF PROSTHETIC DENTISTRY
|
2020-03 |
a generation process for a three-dimensional digital cast that simulates the oral cavity by using an existing maxillary obturator |
JOURNAL OF PROSTHETIC DENTISTRY
|
2019-12 |
부분무치악에서 모델프리, 제로셋업 컴퓨터- 가이드 임플란트 수술용 템플릿의 활용 증례 Use of Model-Free and Zero-Setup Computer-Guided Implant Surgical Template for Partial Edentulous Cases |
대한구강악안면임프란트학회지 (Implantology)
|
2019-10 |
디지털 복제로 만든 맞춤형 인공치로 제작한 임시의치와 임플란트 수술용 템플릿을 통한 임플란트 지지형 고정성 보철 수복 증례 |
대한치과보철학회지
|
2019-08 |
Accuracy of Scanned Stock Abutments Using Different Intraoral Scanners: An In Vitro Study |
JOURNAL OF PROSTHODONTICS-IMPLANT ESTHETIC AND RECONSTRUCTIVE DENTISTRY
|
2019-08 |
A new minimally invasive guided endodontic microsurgery by cone beam computed tomography and 3-dimensional printing technology |
Restorative Dentistry and Endodontics
|
2019-07 |
편측 소수 잔존치 증례에서 CAD software를 활용한 planning 및 임플란트 서베이드 고정성 보철물을 이용한 국소의치 수복: 증례보고 |
대한치과보철학회지
|
2019-06 |
The Impact of Metal Artifacts Within Cone Beam Computed Tomography Data on the Accuracy of Computer-Based Implant Surgery: An In Vitro Study |
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS
|
2019-05 |
Measuring the Complete-arch Distortion of an Optical Dental Impression |
JOVE-JOURNAL OF VISUALIZED EXPERIMENTS
|
2019-04 |
A digital implant custom tray fabrication method using the design process for simulating the position of the impression copings and 3D printing technology |
JOURNAL OF PROSTHETIC DENTISTRY
|
2019-03 |
Computer-based implant planning involving a prefabricated custom tray with alumina landmark structures |
JOURNAL OF PROSTHETIC DENTISTRY
|
2019-03 |
Assessment of metal sleeve-free 3D-printed implant surgical guides |
DENTAL MATERIALS
|
2019-03 |
Enamel wear and aging of translucent zirconias: In vitro and clinical studies |
JOURNAL OF PROSTHETIC DENTISTRY
|
2019-03 |
Integration of intraoral digital scans with a 3D facial scan for anterior tooth rehabilitation |
JOURNAL OF PROSTHETIC DENTISTRY
|
2019-01 |
Complete assessment of occlusal dynamics and establishment of a digital workflow by using target tracking with a three-dimensional facial scanner |
JOURNAL OF PROSTHODONTIC RESEARCH
|
2019-01 |
A digital approach to dynamic jaw tracking using a target tracking system and a structured-light three-dimensional scanner |
JOURNAL OF PROSTHODONTIC RESEARCH
|
2019-01 |
Digital workflow to provide an immediate interim restoration after single-implant placement by using a surgical guide and a matrix-positioning device. |
JOURNAL OF PROSTHETIC DENTISTRY
|
2018-11 |
Effect of the number of splinted abutments on the accuracy of zirconia copings |
JOURNAL OF PROSTHETIC DENTISTRY
|
2018-10 |
Accuracy of 9 intraoral scanners for complete-arch image acquisition: A qualitative and quantitative evaluation |
JOURNAL OF PROSTHETIC DENTISTRY
|
2018-09 |
광범위한 치아부식 및 마모가 있는 환자에서 교정치료와 단일구조 지르코니아 보철물을 이용하여 완전 구강 회복술을 시행한 증례 |
대한치과보철학회지
|
2018-06 |
Placement of a Retro-fitted Single Crown Restoration Under an Existing Denture by Employing Digital Technology: A Case Report |
대한구강악안면임프란트학회지 (Implantology)
|
2018-06 |
Effect of Bio Function Enhanced-Dual TiO2 Nanotube Implants on Osseointegration: A Comparative Study in Rabbit Model |
JOURNAL OF BIOMATERIALS AND TISSUE ENGINEERING
|
2018-05 |
The role of rhFGF-2 soaked polymer membrane for enhancement of guided bone regeneration |
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION
|
2018-03 |
컴퓨터-보조 임플란트 수술에 대한 고찰: 네비게이션 수술 시스템 vs. 컴퓨터가이드 임플란트 템플릿 vs. 수술 로봇 |
대한구강악안면임프란트학회지 (Implantology)
|
2017-12 |
CAD/CAM을 이용한 다운 증후군 환자의 구강 재건 |
대한장애인치과학회지
|
2017-09 |
Simplified digital workflow for dental implant restoration on a stock abutment using an intraoral scanner: A dental technique |
JOURNAL OF PROSTHETIC DENTISTRY
|
2017-09 |
Effects of artificial aging on the biaxial flexural strength of Ce-TZP/Al2O3 and Y-TZP after various occlusal adjustments |
CERAMICS INTERNATIONAL
|
2017-08 |
Effect of air-particle pressures on the surface topography and bond strengths of resin cement to the hybrid ceramics |
DENTAL MATERIALS JOURNAL
|
2017-07 |
표면처리에 따른 금속과 간접복합레진간의 전단결합강도 비교연구 |
대한치과보철학회지
|
2017-06 |
코딩된 치유 지대주를 이용한 디지털 방식의 임플란트 인상채득 방법에 대한 고찰 |
대한구강악안면임프란트학회지 (Implantology)
|
2017-06 |
The effect of different cooling rates and coping thicknesses on the failure load of zirconia-ceramic crowns after fatigue loading |
JOURNAL OF ADVANCED PROSTHODONTICS
|
2017-06 |
Accuracy of intraoral digital impressions using an artificial landmark |
JOURNAL OF PROSTHETIC DENTISTRY
|
2017-05 |
Recording the trajectory of mouth opening and closing for the fabrication of an occlusal splint |
JOURNAL OF PROSTHETIC DENTISTRY
|
2017-03 |
Digital workflow for a dental prosthesis that considers lateral mandibular relation |
JOURNAL OF PROSTHETIC DENTISTRY
|
2017-02 |
Fabrication of a complete, removable dental prosthesis from a digital intraoral impression for a patient with an excessively tight reconstructed lip after oral cancer treatment: A clinical report |
JOURNAL OF PROSTHETIC DENTISTRY
|
2017-01 |
Computer-guided implant planning using a preexisting removable partial dental prosthesis |
JOURNAL OF PROSTHETIC DENTISTRY
|
2016-10 |
Grooved abutment가 임플란트 지대주 연결나사의 안정성에 미치는 영향 |
대한치과보철학회지
|
2016-10 |
Postoperative irradiation after implant placement: A pilot study for prosthetic reconstruction |
JOURNAL OF ADVANCED PROSTHODONTICS
|
2016-06 |
Effect of Surface Treatment on Shear Bond Strength between Resin Cement and Ce-TZP/Al2O3 |
BIOMED RESEARCH INTERNATIONAL
|
2016-02 |
임플란트 가이드 수술을 위한 Planning 방식에 대한 고찰 |
대한치과의사협회지
|
2015-12 |
Co-delivery of platelet-derived growth factor (PDGF-BB) and bone morphogenic protein (BMP-2) coated onto heparinized titanium for improving osteoblast function and osteointegration |
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE
|
2015-08 |
Comparative Study of Recombinant Human Bone Morphogenetic Protein-2 Carriers in Rat Subcutaneous Tissues: Pilot Study |
TISSUE ENGINEERING AND REGENERATIVE MEDICINE
|
2015-03 |
The Evaluation of Osseointegration of Dental Implant Surface with Different Size of TiO2 Nanotube in Rats |
JOURNAL OF NANOMATERIALS
|
2015-03 |
Osseointegration of Implants Surface-Treated with Various Diameters of TiO2 Nanotubes in Rabbit |
JOURNAL OF NANOMATERIALS
|
2014-10 |
금속도재관으로 수복된 Abfraction lesion이 있는 치아에 가해지는 교합력의 응력 분포 분석 |
대한치과보철학회지
|
2014-10 |
임프란트주위염 환자에서 구강전정성형술과 유리치은이식술을 이용한 단계적 재건술 증례: 5년간의 예후 |
대한구강악안면임프란트학회지 (Implantology)
|
2014-07 |
CAD/CAM으로 제작된 monolithic zirconia crown의 시적 전후 교합양상에 대한 비교 |
대한치과보철학회지
|
2014-03 |
A three-dimensional finite element analysis of short dental implants in the posterior maxilla. |
INTERNATIONAL JOURNAL OF ORAL & MAXILLOFACIAL IMPLANTS
|
2014-01 |
Changes in the cutting efficiency of different types of dental diamond rotary instrument with repeated cuts and disinfection |
JOURNAL OF PROSTHETIC DENTISTRY
|
2013-12 |
지르코니아-티타늄 임플란트 지대주를 이용한 상악 전치부 임플란트의 수복 증례 |
The Journal of Digitalized Dentistry
|
2013-06 |
The effect of anodized implants coated with combined rhBMP-2 and recombinant human vascular endothelial growth factors on vertical bone regeneration in the marginal portion of the peri-implant |
ORAL SURGERY ORAL MEDICINE ORAL PATHOLOGY AND ORAL RADIOLOGY
|
2012-11 |
Development of implant loading device for animal study about various loading protocol: a pilot study |
Journal of Advanced Prosthodontics
|
2012-09 |
임플란트 저작능에 영향을 주는 신경학적 원인에 대한 고찰 |
구강회복응용과학지
|
2012-07 |
치아 마모 환자에서 수직고경 증가를 동반하여 단일구조 지르코니아 보철물로 완전구강회복을 시행한 증례 |
대한치과보철학회지
|
2012-04 |
다용도 프라이머가 레진 시멘트와 수복재의 전단 결합 강도에 미치는 영향 |
대한치과보철학회지
|
2012-04 |
Effect of Using a Titanium Washer on the Removal Torque of an Abutment Screw in the External Connection Type of Dental Implant |
IMPLANT DENTISTRY
|