2024-08 |
Designing the Solid Oxide Electrochemical Cell for Superior Thermal Shock Resistance |
ACS Energy Letters
|
2024-08 |
Assessment of energy self-sufficiency of a smart farm through integrated modeling of air-source heat pumps and solar power generation |
Applied Energy
|
2024-07 |
Parametric evaluation of the operating conditions for NO reduction in flameless combustion of an H<inf>2</inf>/NH<inf>3</inf>/N<inf>2</inf> fuel mixture |
International Journal of Hydrogen Energy
|
2024-06 |
Thermal decomposition mechanism of lithium methyl carbonate in solid electrolyte interphase layer of lithium-ion battery |
Energy Storage Materials
|
2024-04 |
Dehydration kinetics of the synthesis of high-nickel cathode materials used in lithium ion batteries |
Journal of Materials Chemistry A
|
2024-04 |
Elucidating the dynamic transport phenomena of solid oxide fuel cells according to rapid electrical load change operation |
Applied Energy
|
2024-03 |
Engineering the heterogeneous catalyst of protonic ceramic electrochemical cells for CO<inf>2</inf>/H<inf>2</inf>O co-electrolysis |
Journal of Materials Chemistry A
|
2024-02 |
Characteristics of combustion and ash deposition for pulverized coal combustion under various thermal loads: An experimental study in an 80 kWth combustion system |
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY
|
2024-02 |
Highly efficient, coke-free electrolysis of dry CO2 in solid oxide electrolysis cells |
Chemical Engineering Journal
|
2024-02 |
Electrochemical performance analysis of a commercial-scale planar solid oxide fuel cell stack and its sensitivity to operating parameters |
Journal of Power Sources
|
2024-01 |
Effective diffusional limitation modeling of a heterogeneous reaction system for computational fluid dynamics application |
Chemical Engineering Journal
|
2023-12 |
Atomically dispersed platinum electrocatalysts supported on gadolinia-doped ceria nanoparticles for practical high-temperature solid oxide cells |
Journal of Materials Chemistry A
|
2023-12 |
Versatile thermodynamic design of a solid oxide electrolysis cell system and its sensitivity to operating conditions |
Energy Conversion and Management
|
2023-11 |
Analysis of Electrochemical Degradation Phenomena of SOC Stacks Operated in Reversible SOFC/SOEC Cycling Mode |
Journal of the Electrochemical Society
|
2023-11 |
Direct methane protonic ceramic fuel cells with self-assembled Ni-Rh bimetallic catalyst |
Nature Communications
|
2023-09 |
Reaction mechanism study and modeling of thermal runaway inside a high nickel-based lithium-ion battery through component combination analysis |
Chemical Engineering Journal
|
2023-05 |
Elucidating the sensitivity to key operating parameters of a commercial-scale solid oxide fuel cell stack with open cathode manifolds |
Energy Conversion and Management
|
2023-05 |
Optimal method for the anode exhaust gas recycling of atmospheric solid oxide fuel cell-combined heat and power systems |
Journal of Power Sources
|
2023-04 |
Carbon-neutral conversion of methane supported by Ni-(Rh, Co) bimetallic catalysts for low-temperature proton-conducting ceramic fuel cells |
Chemical Engineering Journal
|
2022-12 |
A review of solid oxide steam-electrolysis cell systems: Thermodynamics and thermal integration |
Applied Energy
|
2022-10 |
Enhancement of surface morphology and catalytic kinetics of NiAl2O4 spinel-derived Ni catalyst to promote dry reforming of methane at low temperature for the direct application to a solid oxide fuel cell |
CHEMICAL ENGINEERING JOURNAL
|
2022-09 |
Chemkin 기반의 1차원 대향류 확산 화염 모델을 활용한 재순환율 및 수소 함량에 따른 메탄-수소 무화염 연소 특성 해석 연구 |
Clean Technology
|
2022-09 |
A comprehensive investigation of direct ammonia-fueled thin-film solid-oxide fuel cells: Performance, limitation, and prospects
|
Iscience
|
2022-06 |
Comparative evaluation of Ni-based bimetallic catalysts for dry reforming of methane at low temperature: the effect of alloy itself on performance |
INTERNATIONAL JOURNAL OF ENERGY RESEARCH
|
2022-06 |
Construction of high-temperature electronic conduction paths for the scale-up of solid oxide fuel cell technology |
JOURNAL OF MATERIALS CHEMISTRY A
|
2021-12 |
Sensitivity analysis of a solid oxide co-electrolysis cell system with respect to its key operating parameters and optimization with its performance map |
ENERGY CONVERSION AND MANAGEMENT
|
2021-12 |
Hybrid diagnosis method for initial faults of air supply systems in proton exchange membrane fuel cells |
RENEWABLE ENERGY
|
2021-12 |
Thermodynamic analysis of the 2nd generation pressurized fluidized-bed combustion cycle utilizing an oxy-coal boiler and a gasifier |
ENERGY
|
2021-11 |
Effect of Tensile Stress on the Oxide Properties of a Nickel-Based Alloy 600 in Simulated PWR Secondary Water |
MATERIALS
|
2021-10 |
Operational guidelines for a residential solid oxide fuel cell-combined heat and power system with an optimal system layout design |
ENERGY CONVERSION AND MANAGEMENT
|
2021-10 |
A novel interconnect design for thermal management of a commercial-scale planar solid oxide fuel cell stack |
ENERGY CONVERSION AND MANAGEMENT
|
2021-08 |
건물용 고분자 전해질 연료전지 금속분리판 유동장 형상 변화에 따른 산소 확산 특성에 대한 연구 |
한국수소및신에너지학회논문집
|
2021-07 |
Low-temperature processing technique of Ruddlesden-Popper cathode for high-performance solid oxide fuel cells |
JOURNAL OF ALLOYS AND COMPOUNDS
|
2021-03 |
Ni-based bimetallic nano-catalysts anchored on BaZr0.4Ce0.4Y0.1Yb0.1O3 for internal steam reforming of methane in a low-temperature proton-conducting ceramic fuel cell |
JOURNAL OF MATERIALS CHEMISTRY A
|
2021-02 |
가스터빈 초기 설계 단계의 시스템 타당성 평가를 위한 공력 성능, 이차 유로 및 열전달 통합 해석 프로그램 개발 |
Transactions of the Korean Society of Mechanical Engineers, B
|
2020-12 |
Highly active and thermally stable single-atom catalysts for high-temperature electrochemical devices |
Energy & Environmental Science
|
2020-12 |
Thermodynamic analysis of a solid oxide co-electrolysis cell system for its optimal thermal integration with external heat supply |
ENERGY CONVERSION AND MANAGEMENT
|
2020-10 |
Thermal analysis of a 1-kW hydrogen-fueled solid oxide fuel cell stack by three-dimensional numerical simulation |
ENERGY CONVERSION AND MANAGEMENT
|
2020-04 |
1D thermodynamic modeling for a solid oxide fuel cell stack and parametric study for its optimal operating conditions |
ENERGY CONVERSION AND MANAGEMENT
|
2019-12 |
The effect of anode microstructure and fuel utilization on current relaxation and concentration polarization of solid oxide fuel cell under electrical load change |
ENERGY CONVERSION AND MANAGEMENT
|
2019-07 |
Effect of Fe infiltration to Ni/YSZ solid-oxide-cell fuel-electrode on steam/CO2 co-electrolysis |
INTERNATIONAL JOURNAL OF ENERGY RESEARCH
|
2019-02 |
Comparative study of solid oxide fuel cell-combined heat and power system designs for optimal thermal integration |
ENERGY CONVERSION AND MANAGEMENT
|
2018-10 |
Key characteristics of a hydrocarbon-fueled solid oxide fuel cell examined by local thermodynamic states |
ENERGY CONVERSION AND MANAGEMENT
|
2018-09 |
Degradation of anode-supported solid oxide fuel cells under load trip and cycle conditions and their degradation prevention operating logic |
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
|
2018-08 |
Highly durable solid oxide fuel cells: suppressing chemical degradation via rational design of a diffusion-blocking layer |
JOURNAL OF MATERIALS CHEMISTRY A
|
2018-06 |
Three-dimensional dynamic modeling and transport analysis of solid oxide fuel cells under electrical load change |
ENERGY CONVERSION AND MANAGEMENT
|
2018-02 |
High-temperature electrolysis of CO2-enriched mixtures by using fuel-electrode supported La0.6Sr0.4CoO3/YSZ/Ni-YSZ solid oxide cells |
JOURNAL OF POWER SOURCES
|
2018-01 |
Long-Term Stability for Co-Electrolysis of CO2/Steam Assisted by Catalyst-Infiltrated Solid Oxide Cells |
Journal of the Korean Ceramic Society
|
2017-11 |
High-temperature current collection enabled by in-situ phase transformation of cobalt-nickel foam for solid oxide fuel cells |
ACS APPLIED MATERIALS & INTERFACES
|
2017-08 |
Fabrication of dense and defect-free diffusion barrier layer via constrained sintering for solid oxide fuel cells |
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
|
2017-06 |
Nano-tailoring of infiltrated catalysts for high-temperature solid oxide regenerative fuel cells |
NANO ENERGY
|
2017-05 |
Highly controlled thermal behavior of a conjugated gadolinia-doped ceria nanoparticles synthesized by particle-dispersed glycine-nitrate process |
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
|
2017-04 |
Incorporation of a Pd catalyst at the fuel electrode of a thin-film-based solid oxide cell by multi-layer deposition and its impact on low-temperature co-electrolysis |
JOURNAL OF MATERIALS CHEMISTRY A
|
2017-02 |
Demonstrating the potential of yttrium-doped barium zirconate electrolyte for high-performance fuel cells |
NATURE COMMUNICATIONS
|
2017-02 |
Thermal conditions and heat transfer characteristics of high-temperature solid oxide fuel cells investigated by three-dimensional numerical simulations |
ENERGY
|
2017-01 |
Catalytic behavior of metal catalysts in high-temperature RWGS reaction: In-situ FT-IR experiments and first-principles calculations |
SCIENTIFIC REPORTS
|
2017-01 |
In-situ nano-alloying Pd-Ni for economical control of syngas production from high-temperature thermo-electrochemical reduction of steam/CO2 |
APPLIED CATALYSIS B-ENVIRONMENTAL
|
2016-12 |
On the sol-gel synthesis and characterization of (BaSr)(CeZr)O<inf>3</inf>-based fuel cell electrolytes |
IONICS
|
2016-11 |
Degradation of hydration kinetics of proton-conducting Ba(Zr<inf>0.84</inf>Y<inf>0.15</inf>Cu<inf>0.01</inf>)O<inf>3?δ</inf> during conductivity-relaxation experiment |
JOURNAL OF POWER SOURCES
|
2016-10 |
Investigation of the electrochemical reactions at a limited-contact La1-xSrxMnO3/Y-doped ZrO2 interface with a rod-type ionic-probe |
JOURNAL OF POWER SOURCES
|
2016-09 |
Thermal Evolution of BaO-CuO Flux as Sintering Aid for Proton Conducting Ceramic Fuel Cells |
Journal of the Korean Ceramic Society
|
2016-08 |
Constrained Sintering in Fabrication of Solid Oxide Fuel Cells |
MATERIALS
|
2016-08 |
Catalytic Effect of Pd-Ni Bimetallic Catalysts on High-Temperature Co-Electrolysis of Steam/CO2 Mixtures |
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
|
2016-07 |
Record-low sintering-temperature (600 degrees C) of solid-oxide fuel cell electrolyte |
JOURNAL OF ALLOYS AND COMPOUNDS
|
2016-07 |
Panoscopic alloying of cobalt in CeO2?ZrO2 solid solutions for superior oxygen-storage capacity |
ACTA MATERIALIA
|
2016-06 |
Optical absorption and XPS studies of (Ba1-xSrx)(Ce0.75Zr0.10Y0.15)O3-delta electrolytes for protonic ceramic fuel cells |
CERAMICS INTERNATIONAL
|
2016-06 |
The effect of fuel utilization on heat and mass transfer within solid oxide fuel cells examined by three-dimensional numerical simulations |
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER
|
2016-05 |
Impact of nanostructured anode on low-temperature performance of thin-film-based anode-supported solid oxide fuel cells |
JOURNAL OF POWER SOURCES
|
2016-05 |
High-performance thin-film protonic ceramic fuel cells fabricated on anode supports with a non-proton-conducting ceramic matrix |
JOURNAL OF MATERIALS CHEMISTRY A
|
2016-05 |
High-performance and robust operation of anode-supported solid oxide fuel cells in mixed-gas atmosphere |
INTERNATIONAL JOURNAL OF ENERGY RESEARCH
|
2016-04 |
Scale-Up of Thin-Film Deposition-Based Solid Oxide Fuel Cell by Sputtering, a Commercially Viable Thin-Film Technology |
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
|
2016-01 |
Low-temperature co-sintering technique for the fabrication of multi-layer functional ceramics for solid oxide fuel cells |
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
|